worm wheel
美 
英
英汉解释
英英解释
例句
Mainly use worm wheel , six worm axes drive , steel seat , high compression resistance, fetch up the former product pressure is not enough .
主要采用蜗轮、蜗杆式六轴传动的方式，全钢机座，耐压力强，弥补了旧产品压力不足的缺点。
The worm wheel is formed by means of two components for better receiving the worm wheel on the lever spring.
为了更好地将蜗轮接收在杠杆弹簧上，该蜗轮两件式地构成。
The company has processing center, worm wheel and gear grinding machine, such as integrated detector processing, testing equipment.
公司具有加工中心、蜗杆砂轮磨齿机及齿轮综合检测仪等加工、检测设备。
Specializing in manufacturing the straight gear, bevel gear, spiral bevel gear, gear shaft, worm wheel and worm shaft.
专业生产各种直齿轮，斜齿轮，螺旋伞齿轮、齿轴、蜗轮及蜗杆。
Because of their ability to reduce friction and wear, they are usually used as the material for making the worm wheel in a worm gear set.
因为具有减摩性和耐磨性的性能，它们通常用来制作涡轮减速器中的涡轮。
The sub-degree scores unrestricted, sub-degree positioning accuracy is directly related to worm and worm wheel machining accuracy.
其分度等分数不受限制，分度定位精度直接决定于蜗杆蜗轮的加工精度。
Slag collector: wet slag discharge is made by hydraulic ratchet wheel, detent, worm wheel or worm from both sides.
清灰机构：采用液压驱动棘轮、棘爪装置或蜗轮蜗杆装置湿式双侧除灰。
Worm and worm wheel mechanism is used to transfer between two crisscross axis of sports and power.
蜗轮蜗杆机构常用来传递两交错轴之间的运动和动力。
A worm and worm wheel gives a large speed ratio but with significant sliding.
涡轮和蜗杆可获得很大的降速比，但是存在严重的相对滑动。
Worm wheel connects with coat and products body cass.
蜗轮与外套连接在一起，伸出壳体外。
Analysis of the cause of wear and tear of the worm wheel of reciprocating pump and its improvement
往复式计量泵蜗轮磨损原因分析和改进
Squirming out of a worm - wheel dilemma
制造蜗轮的新方法
Judging the direction of worm wheel rotation and force analysis in worm transmission
蜗杆传动中蜗轮转向的判定及力的分析
Gear and Worm-wheel Steering Gear'Performances Comparison and Backlash Eliminated Structure
齿轮传动与蜗轮蜗杆传动性能比较与消隙机构
A Method for Inputting Worm Wheel Parts Information and its Application in CAPP
基于神经网络的零件信息输入技术在蜗轮蜗杆CAPP中的应用
Research on the Working Orthogonal Clearance of Flying Cutting Tool Machining Worm Wheel in Radial Feeding Way
飞刀径向进给加工锅轮工作后角分析
The Application of Varied Lead-interval Worm and Worm Wheel Kinematic Pair in High Precision Round Subsection
变导程蜗轮蜗杆副在高精度分度中的应用
Research on the grinding method by tangential differential action on the worm wheel grinding machine
蜗杆砂轮磨齿机切向差动磨削的研究
Finite element analysis on worm wheel tooth of cylindrical worm pair with circular-arced tooth
圆弧齿圆柱蜗杆副蜗轮齿的有限元分析
Non-machining Investment Precision Casting Process for Gas Turbine's Worm Wheel Blade
燃气蜗轮发动机蜗轮叶片的无余量熔模精铸工艺
Non-machining Investment Precision Casting Process for Gas Turbine's Worm Wheel Blade
燃气蜗轮发动机蜗轮叶片的无余量熔模精铸工艺
The characteristic modeling of planar double-enveloping worm wheel
平面二包环面蜗轮的特征建模
Failure Analysis and Improvement about Worm Wheel in Turbine for Condensate Pump
凝液泵透平蜗轮失效原因分析及改进措施
Definitions and parameters on cylindrical worm gear pairs with rectangular crossing shafts - Part 1: Worm and worm wheel
带矩形交叉轴的圆柱蜗轮传动装置的定义及参数.第1部分：蜗杆和蜗轮
Feasibility and Error Analysis on Applying Gear Hob in Processing Worm Wheel with Gear Hob
用齿轮滚刀加工蜗轮的可行性及其误差分析
Study on Measurement of Flank Topography of Worm Wheel with CNC Gear Measuring Center
基于CNC齿轮测量中心的蜗轮齿侧形貌测量研究
Design of Finger Conical Surface Twice Covered Cylinder Worm Drive Worm Wheel Hob
指状锥面二次包络圆柱蜗杆传动蜗轮滚刀的研制
Machining Worm Wheel with Flying Cutter on a Gear Rolling Machine
在滚齿机上用飞刀加工蜗轮的探讨
Development Of Conical Surface Double Enveloping Cylindrical Worm Wheel Hob
锥面二次包络圆柱蜗杆传动蜗轮滚刀的研制
Designing Calculation of Processing Worm Wheel with Gear Hob
齿轮滚刀加工蜗轮的设计计算
Realizing high precision auto-graduation by using low precision worm wheel
用低精度蜗轮副来实现高精度的自动分度
Terminology and symbols for cylindrical worm and worm wheel
圆柱蜗杆、蜗轮术语及代号
The Manufacturing Technique of Copper Worm Wheel Blank
铜蜗轮毛坯的制造技术
Machining Worm Wheel with Slotted Quenched Roller of Worm Pair
用开槽淬硬蜗杆对滚加工蜗轮
General mathematical model for end faced worm wheel pairs
端面蜗轮副的通用数学模型
Application of Standard Cutting Hob on Worm Wheel Hobbing
采用标准齿轮滚刀加工蜗轮的方法研究
Study on development of ceramics worm wheel and friction and wear mechanisms of material
陶瓷蜗轮的研制及材料摩擦磨损机理的研究
Machining worm-wheel of double pitch using single cutter
单刀加工双层导程蜗轮副
Worm-wheel hob design using Case-Based Reasoning method
基于实例推理的蜗轮滚刀设计
Processing Worm Wheel by Flying Cutting Tool
在滚齿机上用蜗轮飞刀加工蜗轮
